Search by manufacturer,
wood type, or by the name of a fire surround
1.Shown here the back panel sits proud of the wall by one inch. This will require a 1 inch rebate on the fire surround.
If you have something sitting proud of the wall then measure the thickness of this to get the required rebate.
Standard granite or marble back panels supplied by us require a 1 inch rebate.
Unless otherwise stated all our surrounds come as standard with a 1 inch rebate this can be increased to 3 inches by the removing of 6 screws at home.
You do not need to inform us if you require a standard 1 or 3 inch rebate.
2.The arrow is pointing a the 1 inch gap created by having a 1 inch rebate, this goes all the way around the inside of the legs and allows for the back panel as shown above to fit, (the back panel sits behind the legs).
The inside of the legs will now sit flat to the back panel and the outside of the legs will sit flat to the wall.
If you are having a flat wall instillation without a back panel you must request NO rebate. If you don’t the surround will not sit flat to the wall on the inside of the legs
If you require a different rebate to standard please inform us on the comments page at the checkout. We confirm all the details of your order by invoice within 24hrs.
This is now shown with the Granite back panel in place. The inside of the legs now sits flat against the face of the granite back panel and the outside of the legs sits flat against the wall.
If you are still unsure about your rebate requirements please don't hesitate to call us. We are happy to explain them in detail and aim to make purchasing one of our fire surrounds as easy as possible.